How to make a Telegram video sticker
From a video clip on your phone or your computer · last checked November 2026
Short answer. A Telegram video sticker is a .WEBM file encoded with VP9, no longer than 3 seconds, no bigger than 256 KB, at 30 FPS or less, with no sound, and with one side exactly 512 px. Telegram's built-in sticker editor only works with photos, so to turn a video clip into a sticker you either convert it yourself (free, with ffmpeg) and upload it through the @Stickers bot, or use an app that does the conversion for you.
There are two honest ways to do it, and the right one depends on whether you want to open a terminal. Both are below, along with the reasons Telegram rejects a file and how to fix each one. If you want every option side by side, including bots and websites, see all the ways to make a video sticker, compared.
What Telegram will accept
| Container and codec | .WEBM with VP9 video |
|---|---|
| Size on screen | One side exactly 512 px, the other 512 px or less |
| File size | 256 KB at most (262,144 bytes) |
| Length | 3 seconds at most |
| Frame rate | 30 FPS at most |
| Sound | None: no audio stream in the file at all |
These numbers come from Telegram's own sticker documentation. The requirements page has the full list, including static stickers and custom emoji, and a way to check a file before you upload it.
Option 1: on your iPhone, no terminal
This is what we built Weejistick for. Pick a clip, trim it to 3 seconds, crop it, choose whether it loops forward, in reverse or as a boomerang, and the app encodes a sticker that meets the rules above. It checks every file against those rules before you can send it, then hands the whole pack to Telegram in one tap through Telegram's official import feature.
The encoding runs on the phone. Your source video is never uploaded, to us or anyone else, and there is no account or login. The finished sticker leaves your phone only when you send it to Telegram.
What to know before you install it:
| Price | Free to use. Your first two stickers have no watermark; after that, free stickers carry a small corner mark. A one-time unlock removes it: a 3-Day Pass ($1.99) or Lifetime ($4.99). No subscription. |
|---|---|
| Devices | iPhone only, iOS 17 or later. Telegram must be installed to send stickers. |
| Limits | Video stickers are rectangular clips; the app does not remove the background from video. Photo stickers can have a cut-out subject. |
Get Weejistick on the App Store
On Android? The free route below works on any computer. We only make the iPhone app, so we would rather point you at the manual route than pretend otherwise.
Option 2: free, by hand, with ffmpeg
If you have ffmpeg, one command does the whole conversion. This is the exact command we test against, and it produces a valid sticker from a normal phone video:
ffmpeg -i input.mp4 -t 3 -an -map_metadata -1 \
-vf "fps=30,scale=512:512:force_original_aspect_ratio=decrease" \
-c:v libvpx-vp9 -b:v 400k -y sticker.webm
Piece by piece, because every flag is there for a reason:
-t 3 | Caps the output at 3 seconds. It takes the first three seconds; add
-ss 5 before -i to start 5 seconds in instead. |
|---|---|
-an | Drops the audio stream entirely. A silent track is still a track. |
-map_metadata -1 | Drops the source file's hidden details. Phone videos often carry the place they were filmed, the phone model and the time, and ffmpeg copies them into the sticker unless you tell it not to. We checked: without this flag, a test clip's GPS location survived into the .webm. |
fps=30 | Phone video is often 60 FPS. This halves it, which also halves what the bitrate has to pay for. |
scale=512:512: |
Fits the frame inside 512×512 without distorting it, which puts the longest side on exactly 512. A portrait 1080×1920 clip comes out 288×512. |
-b:v 400k | Keeps you under the 256 KB ceiling with room to spare: 400 kbit/s across 3 seconds is about 150 KB. |
On a 6-second, 1080×1920, 60 FPS test clip with sound and a GPS tag, that command (ffmpeg 6.1)
produced a 288×512 VP9 file of about 111 KB, exactly 3.00 seconds long, with no audio stream and no
location tag. If your own clip comes out larger, lower -b:v and re-run; if it looks soft, raise it
and check the size stays under 262,144 bytes.
The same command is packaged as two small free scripts, MIT licensed, in
telegram-video-sticker on GitHub: make-sticker.sh runs it and lowers the
bitrate until the file fits, and check-sticker.sh checks any .webm against the limits
above.
Getting the file into Telegram
Open @Stickers in Telegram, as a chat or as its mini app, and start a
new video sticker set from its menu. Give the pack a name, then send your .webm as a
file, not as a video: sent as a video, Telegram may compress it on the way and the bot will not accept it.
Give each sticker an emoji, then publish the pack and share its t.me/addstickers/ link.
Send as file, every time. On mobile, use the attachment menu and choose File rather than Gallery. This one detail is behind many "my sticker was rejected and I don't know why" posts.
When it gets rejected anyway
| File too big | Over 256 KB. Lower -b:v, or shorten the clip. |
|---|---|
| Wrong format | Usually not VP9, or sent as a video instead of a file. VP8 will not do; the
encoder must be libvpx-vp9. |
| Not accepted, no clear reason | Check for a leftover audio stream first, then the codec, size
and length, with the ffprobe commands on the requirements
page. |
| Wrong dimensions | Neither side is exactly 512. Scaling to "fit inside 512×512" fixes it. |
| Looks blocky or jerky | 256 KB is tight. A shorter clip or a lower frame rate leaves more bits for each frame. |
Why not just use Telegram's own editor?
You should, for photos. Telegram's built-in sticker editor removes backgrounds, adds text and drawings, and builds packs, free and inside the app. Telegram's documentation describes it as turning photos into stickers; it does not turn your own video clips into video stickers, which is the gap both options above fill.
Questions people ask
Can I make a Telegram video sticker on my phone?
Yes, with an app that converts the clip. Telegram's built-in editor works with photos only. On iPhone, Weejistick converts the clip on the phone and sends the pack to Telegram in one tap. On Android, or anywhere else, the ffmpeg route above works from a computer.
How long can a Telegram video sticker be?
Three seconds at most, at up to 30 frames per second. Telegram plays it on a loop, so a clip whose last frame flows into its first looks best.
Can a video sticker have a transparent background?
VP9 can carry transparency, so a video made with an alpha channel (for example, exported from an editing app with a transparent background) can be a cut-out video sticker. Ordinary phone footage has no transparency. Weejistick makes rectangular video stickers and does not remove video backgrounds.
Do video stickers have sound?
No. Telegram requires that the file has no audio stream at all.
Can people on Android see my video stickers?
Yes. Video stickers are part of Telegram itself and play in current Telegram apps on every platform. Only the tool you use to make them depends on your device.
Does the sticker reveal where my video was filmed?
It can. Phone videos often store the location, the phone model and the time. ffmpeg copies these into
the sticker by default, which is why the command above includes -map_metadata -1. Weejistick
strips them from every sticker it makes since version 1.1; stickers made with version 1.0 kept them, so if
that matters to you, make those again from the original clip.
Requirements are from Telegram's sticker documentation and its sticker import documentation. The ffmpeg command was run and its output checked against those requirements before publishing.